[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[altq 30] Re: CBQ is not working as expected.
> Are you running both vic and mgen on PC1? If so, mgen eats up the
> processer power.
No, MGEN is running on Sparc. Sparc runs vic and mgen and PC2 runs only
I've forgot to say, but the two PC's are Pentium 300Mhz Celleron(64MBRAM)
What about PC's ??
Are there sufficient for a good performance ??
> RSVP (or CBQ) reserves only network bandwidth; it doesn't reserve CPU
> power nor process scheduling.
I'll see if it is a CPU power trouble.
... a little question:
Is any network card able to run CBQ on ? Is CBQ a software layer ?
or it depends on something on hardware ?
> Try to reserve from PC1 to SPARC and run mgen on PC2.
Thanks, I'll try when I have a chance.
> >> reserved PC1/8990 to PC2/8991 and using same hosts/port to transfer video.
^^^^^^^^ Here my mistake in the previous message
I'd say SOLARIS/8991
> >> reservation made by rsvp(used to be controlled load [cl])
> >> I've read docs/TIPS.txt and see that isn't a good ideia to use CBQ w/ UDP?
Any observation about UDP ?
Thanks a lot,