Hello @ll!
I've tried to install altq on freebsd4.5 (build
from 1.03.2002) but I can't make this working.
I have compiled the kernel (followed INSTALL
instructions), the kernel has been compiled without any errors. After reboot the
system came up, but when I tried to run altqd (like in test mode from INSTALL
file) - the system crashed (kernel panic).
I have tried to compile my kernel without IPF,
IPFW, BRIDGE etc. but the altqd deamon always crashed the server. I thinked that
it could be an hardware problem, but on another systems the altqd is crashing
system too.
Does anyone know how to fix this???
I would be glad for any information.
Regards, Lukasz Deszynski
Tested on - machine 1:
Copyright (c) 1992-2002 The FreeBSD
Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University
of California. All rights reserved.
FreeBSD 4.5-STABLE #2: Sat Feb 23
18:24:42 GMT 2002
Timecounter "i8254" frequency 1193182
Hz
Timecounter "TSC" frequency 342615771 Hz
CPU: Pentium II/Pentium
II Xeon/Celeron (342.62-MHz 686-class CPU)
Origin =
"GenuineIntel" Id = 0x660 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real
memory = 268369920 (262080K bytes)
avail memory = 258142208 (252092K
bytes)
Preloaded elf kernel "kernel.old" at 0xc0324000.
Pentium Pro MTRR
support enabled
md0: Malloc disk
Using $PIR table, 7 entries at
0xc00fdca0
npx0: <math processor> on motherboard
npx0: INT 16
interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on
motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440
LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on
pcib1
pci1: <S3 ViRGE GX2 graphics accelerator> at 0.0 irq 11
isab0:
<Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA
bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port
0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1:
at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB
controller> at 7.2 irq 10
chip1: <Intel 82371AB Power management
controller> port 0x5000-0x500f at device 7.3 on pci0
xl0: <3Com 3c980C
Fast Etherlink XL> port 0xe400-0xe47f mem 0xee001000-0xee00107f irq 12 at
device 16.0 on pci0
xl0: Ethernet address: 00:04:75:77:68:9e
miibus0:
<MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on
miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
xl1: <3Com 3c980C Fast Etherlink XL> port 0xe800-0xe87f mem
0xee000000-0xee00007f irq 10 at device 20.0 on pci0
xl1: Ethernet address:
00:04:75:77:6a:83
miibus1: <MII bus> on xl1
xlphy1: <3c905C
10/100 internal PHY> on miibus1
xlphy1: 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem
0xc0000-0xc9fff on isa0
fdc0: <NEC 72065B or clone> at port
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes
threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at
atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on
isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port
0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port
0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at
port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in
COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0:
<Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel
I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based
forwarding enabled, default to accept, logging limited to 100 pac
BRIDGE
020214 loaded
DUMMYNET initialized (011031)
IP Filter: v3.4.20
initialized. Default = pass all, Logging = enabled
ad0: 32253MB
<ST340016A> [65531/16/63] at ata0-master UDMA33
machine2:
Copyright (c) 1992-2002 The FreeBSD
Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University
of California. All rights reserved.
FreeBSD 4.5-STABLE #5: Mon Mar 4
09:11:01 GMT 2002
Timecounter "i8254" frequency
1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping =
1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real
memory = 134152192 (131008K bytes)
avail memory = 125857792 (122908K
bytes)
Preloaded elf kernel "kernel" at 0xc04a7000.
Pentium Pro MTRR
support enabled
md0: Malloc disk
Using $PIR table, 7 entries at
0xc00fdd80
npx0: <math processor> on motherboard
npx0: INT 16
interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on
motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440
BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on
pcib1
pci1: <NVidia/SGS-Thomson Riva128 graphics accelerator> at 0.0
irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33
controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14
on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB
(PIIX4) USB controller> port 0xe000-0xe01f irq 10 at device 7.2 on
pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0:
USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB
Power management controller> port 0x5000-0x500f at device 7.3 on pci0
rl0:
<RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe7000000-0xe70000ff
irq 11 at device 15.0 on pci0
rl0: Ethernet address:
00:e0:7d:7a:e8:0d
miibus0: <MII bus> on rl0
rlphy0: <RealTek
internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem
0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes
threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16
virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10
on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f
irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE
mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer>
on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on
ppbus0
DUMMYNET initialized (011031)
IP packet filtering initialized,
divert enabled, rule-based forwarding enabled, default to deny, logging limited
to 100 packe
ts/entry by default
IP Filter: v3.4.20 initialized.
Default = pass all, Logging = enabled
ad0: 29333MB <WDC WD307AA-00BAA0>
[59598/16/63] at ata0-master UDMA33
Mounting root from
ufs:/dev/ad0s1a
swapon: adding /dev/ad0s1b as swap device
Automatic boot
in progress...
/dev/ad0s1a:
FILESYSTEM CLEAN; SKIPPING
CHECKS
/dev/ad0s1a:
clean, 91003 free
(1155 frags, 11231 blocks, 0.4%
fragmentation)
/dev/ad0s1f:
FILESYSTEM CLEAN; SKIPPING
CHECKS
/dev/ad0s1f:
clean, 5373784 free
(115936 frags, 657231 blocks,
0.4% fragmentation)
/dev/ad0s1e:
FILESYSTEM CLEAN; SKIPPING
CHECKS
/dev/ad0s1e:
clean, 170282 free
(690 frags, 21199 blocks, 0.1%
fragmentation)
kern.ps_showallprocs:
1
->
0
net.inet.tcp.blackhole:
0
->
1
net.inet.udp.blackhole:
0
->
1